Product Description
powerful, compact, comfortable. Better handling, greater capacity and lower handforce required compared to conventional bolt end cutting nippers. With cutting edges for soft, hard and piano wire. Particularly high cutting capacity with minimum effort due to optimum transmission ratio. Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Forged.
Technical attributes
| Length | : | 220 mm | |
| Width | : | 45 mm | |
| Height | : | 15 mm | |
| Weight | : | 435 g |
Documents
Detailed description
 | High-performance cutting of nails/bolts/springs/fencing wire Perfect cutting in case of front access For work situations that allow at best limited lateral access to the material to be cut, the end cutting nipper principle makes for the best tool shape. It is possible to cut nails and bolts emerging from any surface very close to the exit point using the Knipex 61 01 200 bolt end cutting nippers. Unlike conventional end cutting nippers, the handles are angled 5° from the vertical, leaving enough space for fingers and knuckles when cutting close to a boundary (e.g. wall, joist or beam). The revolutionary design with the one-sided but double-length cutting edges also makes it possible to cut off wider rails and longer sections that can be easily moved past the joint. |
High-performance cutting of nails/bolts/springs/fencing wire
Perfect cutting in case of front access
For work situations that allow at best limited lateral access to the material to be cut, the end cutting nipper principle makes for the best tool shape. It is possible to cut nails and bolts emerging from any surface very close to the exit point using the Knipex 61 01 200 bolt end cutting nippers. Unlike conventional end cutting nippers, the handles are angled 5° from the vertical, leaving enough space for fingers and knuckles when cutting close to a boundary (e.g. wall, joist or beam). The revolutionary design with the one-sided but double-length cutting edges also makes it possible to cut off wider rails and longer sections that can be easily moved past the joint.
 | Knipex bolt end cutting nippers/powerful but easy on the hand Bolt end cutting nippers from Knipex can handle spring steel wire and all other wire classes; they are also very easy to use. These pliers offer impressive cutting capacity and ergonomic efficiency, and also reduce some of the work for the craftsmen who use them. Professionals who use tools a lot every day expect tools that will make their work easier and safer and that will withstand many years of tough service. We forge our pliers from high-quality materials, processing them with high precision on modern machine tools and hardening them through careful heat treatment. All pliers from Knipex embody over 130 years of specialist expertise. |
Short overview
- Bolt end cutting nippers, ideal for fencing, carpentry, concrete construction
- 85° angled cutting edges
- Cutting values: soft Ø1.0–6.0 medium-hard Ø4.0 hard Ø3.5 piano Ø3.0 mm
- Black atramentised pliers; finely ground head
- Vanadium electric steel, forged multistage oil-hardened
- Cutting edges also induction-hardened, hardness approx. 64 HRC
- Handles with anti-slip plastic coating
- Length 200mm; Net weight 435 g
Even cuts spring steel wire High lever transmission and inductively hardened cutting edges (64 HRC) enable this bolt end cutting nippers to cut spring steel wire up to Ø3.0 mm.
Numerous trade applications This is a valued tool in carpentry, boat building, wire/fence construction, and for concrete builders
Flush cutting The bolt end cutting nippers remove pins/bolts protruding from surfaces in an almost flush cut.
Additional products
